Perimeter fences, anti-climb mesh and heavy sliding gates, designed and installed for working industrial sites.
Clontarf's industrial area sits in the west of the suburb, close to the Hays Inlet wetlands and only a short drive from the Houghton Highway. The workshops and warehouses there run trucks, forklifts and stock through their gates every day, and their perimeters have to stop theft without slowing the work. Every fence installation Clontarf businesses book starts with a risk and site assessment. That means fencing in Clontarf is planned around how the yard really works. From there we design, fabricate and install fencing in Clontarf that suits the site's real risks and vehicle movements.
Clontarf is where the bridges land on the peninsula, and our industrial crews work right across the neighbouring suburbs. Companies with more than one yard can roll fencing in Clontarf into a single program. Ask for one quote covering fencing in Clontarf and your other depots.
Geebung workshop39 Basalt St, Geebung QLD 4034
In 1921 Clontarf had just 26 residents. By 1933 it had 91 (Queensland Places). The suburb has grown into a mix of homes and light industry, and that mix shapes how a perimeter should be built. An industrial fence here must protect the business while sitting comfortably next to houses, schools and parkland.
We install warehouse perimeter fencing, anti-climb mesh and industrial sliding gates. Site managers get a written scope for fencing in Clontarf after we walk the boundary. We can stage fencing in Clontarf so the yard stays secure every night of the job.
Security fencing installation is about more than height. The mesh, the posts, the gates and any toppings all have to work together, and a single weak gate undoes the rest. We have worked as an industrial fencing contractor since 1996 under QBCC licence 1016362. Our Geebung workshop fabricates the frames and components we install, which helps us match gates to the site and keep lead times realistic. That is why managers bring their fencing in Clontarf to us.
Every job starts with a risk and site assessment. We look at what the yard stores, where the blind spots are, how trucks enter and turn, and what the neighbours can see. From there we recommend chain wire, welded mesh or anti-climb mesh for each side, and whether a topping is appropriate and permitted. Our team has more than 90 years of combined experience. Gates are built automation-ready, and we work with automation installers if you want motors and access control. Installation is staged so your fencing in Clontarf is staged to keep the yard secure overnight wherever possible.
“Awesome business and very competitive prices” (Johnno, 5★ Google review)
We assess the site before we recommend a fence.
Site-specific designMesh with openings too small for footholds.
Harder to scaleSliding and swing gates sized for trucks.
Fabricated in GeebungThe yard stays secure throughout the job.
Secure overnightQBCC licensed industrial installer.
Licence 1016362Most industrial fencing Clontarf sites need comes down to these five jobs. Pick one or combine several, and we'll set out fencing in Clontarf in stages that suit your shifts and deliveries, so the yard keeps working throughout. Ask us to price fencing in Clontarf for your site.
Warehouse perimeter fencing usually runs 1.8 m to 2.4 m around the full site. We install chain wire, welded mesh or anti-climb mesh on heavy-duty posts set in concrete, with the mesh mechanically tensioned. Long perimeters are staged so security is maintained throughout.
Best for: warehouses and depots
See warehouse perimeter fencingAnti-climb mesh fencing has small openings that leave no room for fingers or boot toes. It is much harder to scale or cut than standard chain wire. We often recommend it for street frontages, storage compounds and sections out of sight of the office.
Best for: high-risk sections
See security fencingIndustrial sliding gates run along the fence line, so they suit wide truck openings without needing swing space. We fabricate them to size in Geebung and build them automation-ready. Swing gates are also available where the layout suits. Heavy wheels and tracks are matched to the gate's weight.
Best for: truck entries
See security gatesBarbed wire toppings on angled brackets add a deterrent along the top of a perimeter. Razor wire may be used in certain areas where it is permitted. We check what suits the site and its neighbours before recommending any topping, and keep toppings away from public paths.
Best for: added deterrence
See industrial fencingPerimeter fence repairs restore security after a break-in, a vehicle strike or storm damage. We replace cut mesh, bent posts and damaged gates, and re-tension slack runs. If a section keeps failing, we'll suggest an upgrade for that part of the boundary.
Best for: damaged fences
See security fencingNot sure which service you need? Talk to us on 07 3865 8100
Clontarf is a mix of homes and light industry. The industrial area in the west sits near the wetlands of Hays Inlet, while homes, schools and parks fill the rest. Clontarf Beach State High School had 909 students in 2023, and Pelican Park and the Kroll Gardens dog park draw people along the foreshore.
Industrial yards here share streets with residents, so security has to be strong but not aggressive. Sites near the inlet sit on low ground and face salt air. Trucks and forklifts strike gates and posts. Theft of tools and materials is a constant risk for small businesses. Many sites also run early starts, so access can't be cut off.
A weak perimeter leads to theft and insurance claims. Toppings in the wrong place can upset neighbours or break local rules. Corroded posts and damaged gates fail when they are needed most.
We match the fence to the risk on each side. Frontages and storage areas get anti-climb or welded mesh, back runs may use chain wire, and toppings are used only where suitable. Gates are sized for the vehicles. That keeps fencing in Clontarf secure and neighbour-friendly. Coated finishes help fencing in Clontarf last near the water.
Sources: ABS 2021 Census QuickStats – Clontarf (SAL30629); Wikipedia – Clontarf, Queensland; Wikipedia – Clontarf Beach State High School; Queensland Places – Clontarf
Yard managers on the west side bring us these three problems again and again. Here's how we fix each one as part of fencing in Clontarf. Ring us to walk your boundary and talk through fencing in Clontarf.
Standard chain wire with a top rail is easy to climb, and side boundaries are often out of view.
Repeat theft drives up insurance costs and disrupts work.
We replace the weak run with anti-climb mesh on heavy posts and remove footholds. Where suitable and permitted, a barbed wire topping can be added. We'll also check that gates and corners match the new standard, so the weak point doesn't simply move.
Gates sized for vans years ago can't handle today's trucks turning in from the street.
Every strike bends the frame or a post, and the gate is soon left open.
We widen the opening, set new gate posts in deep footings and fabricate an industrial sliding gate to the new width. The gate is built automation-ready if you want to add a motor later.
Low, damp ground and salt air attack bare steel at the base of posts and mesh.
Corroded posts lose strength and can fail in a storm, leaving the yard open.
We replace the affected posts and mesh with galvanised steel and a powder-coated or PVC finish, set in concrete that sheds water. For the most exposed runs, we'll recommend a heavier wire gauge.
Noticed one of these issues? Book an inspection
Clontarf is where the bridges land on the peninsula, and our industrial crews work right across the neighbouring suburbs. Companies with more than one yard can roll fencing in Clontarf into a single program. Ask for one quote covering fencing in Clontarf and your other depots.
Don't see your suburb? Contact us
Still have questions? Call 07 3865 8100
Get a Free QuoteWe walk the full boundary with you and look at what the yard stores, where people could get in unseen, how vehicles move and what neighbours face. We then recommend the mesh type, height, gates and any toppings for each side. The result is a written scope and quote for fencing in Clontarf that matches the real risk.
Razor wire is allowed in certain areas, but it depends on the site, its zoning and its neighbours, and any local rules. We check what is permitted before recommending it. Many yards near homes choose anti-climb mesh or barbed wire toppings instead, which deter climbing without the same concerns. We'll talk it through during the site assessment.
Yes. We stage perimeter work so each section is closed before we move to the next, and we aim never to leave the site open overnight. Gates are usually fitted early so access can be controlled. We'll agree the staging plan with you before work starts. Your staff will always know which entry is in use while fencing in Clontarf is underway.
We fabricate sliding and swing gates that are automation-ready, with frames built to take motors and access control. We work with automation installers to fit and commission the motors, keypads or swipe cards. Tell us how the gate needs to operate, and we'll plan the frame and footings to suit.
Most warehouse perimeters are 1.8 m to 2.4 m high, depending on the risk and the site. Fences over 2 m above natural ground generally need building approval in Moreton Bay, so we allow for that in the program. We'll recommend a height that suits the risk, the approvals and the neighbours.
Yes. We replace cut mesh, bent posts and damaged gates, and we can upgrade the section that was breached so it is harder to get through next time. Call us with photos, and we'll arrange a time to make the yard secure again as quickly as we can. We'll talk you through the options when you call.
In December 1882 the Clontarf North estate went to sale, along with the Cowes and Belvidere estates. Growth was slow, with 26 residents in 1921 and 91 in 1933. An army hut served as a temporary Methodist church from 1947 until a church was built in 1950. St Barnabas' Anglican Church was dedicated in July 1959, and Grace Lutheran Primary opened in 1971. The Clontarf Bayside plaza opened in 2002. Sureline Fencing began in Northgate in 1996 and moved to Geebung in 2006. Today our industrial crews leave that workshop to build fencing in Clontarf.
Fencing in Clontarf is measured, fabricated and installed by our team from 39 Basalt St, Geebung.
| Business | Sureline Fencing |
|---|---|
| Phone | (07) 3865 8100 |
| Licence | QBCC 1016362 |
| info@surelinefencing.com.au | |
| Address | 39 Basalt St, Geebung QLD 4034 Workshop, retail and wholesale outlet |
| Hours | Mon–Fri 6:00 am – 3:00 pm Sat–Sun Closed |
| Service area | Clontarf and the wider Moreton Bay region, serviced from Geebung |
| Website | surelinefencing.com.au |
Sources: Queensland Places – Clontarf; Wikipedia – Clontarf, Queensland; Sureline Fencing – About; ABS 2021 Census
Copyright © 2025, Website design and hosting by Smart Local